Customers · Logistics, 3PL & e-commerce operators

Warehouses and distribution centres built around your racking

Clear-span distribution centres, fulfilment centres and cross-docks with the eave height, dock layout and floor area your operation needs. Designed by our engineers, made in our own factory and delivered on a date your customers can count on.

Request a quotation See the solutions

2018exporting steel structures to Thailand

30–60 mtypical clear spans

3Dmodel checked with racking and docks

2,500 Tfabrication capacity every month

What you need

Space that is ready for the peak season

Thai e-commerce and contract logistics keep growing, and every new contract needs space: a distribution centre near Bangkok, a fulfilment centre in the EEC, a cold chain hub for food.

You need a steel warehouse with the right clear height for your racking, column grids that do not block the aisles, enough docks and canopies for the rainy season, and a building that is ready before the next peak.

Clear spans and eave heights matched to the racking plan
Dock doors, canopies and levellers in the right places
A handover date that matches the client contract
Room to extend when volumes grow
Mezzanines for picking and offices

Your challenges, our answers

What logistics operators tell us, and how we answer

Challenge 01

The client contract starts on a fixed date

Our answer

Your fabrication slot is confirmed at order from 2,500 T of monthly capacity, and steel is shipped in erection sequence.

Challenge 02

Columns get in the way of the racking

Our answer

We set the column grid from your racking and aisle layout, with clear spans where you need them.

Challenge 03

Heavy rain at the docks

Our answer

Deep loading canopies and roof drainage designed for Thai monsoon rain.

Challenge 04

Volumes grow faster than planned

Our answer

End walls designed for extension, so new bays can be added later without stopping operations.

Challenge 05

Picking needs more floor area

Our answer

Steel mezzanines and pick platforms designed with the building, sized for your conveyors.

Challenge 06

Fire rules for high-bay storage

Our answer

Fire protection up to R120 applied in the factory where the insurer or authority requires it.

Solutions & products that fit

Solutions for logistics and e-commerce

Designed, fabricated and shipped by one team, from our own factory to a Thai port or your site.

Distribution & fulfilment centres

Clear-span steel warehouses with high eaves and racking-ready layouts.

Cold storage & cold-chain hubs

Frames for insulated panels, freezer rooms and chilled docks.

Mezzanines & pick platforms

Multi-level picking, conveyor and office mezzanines.

Loading canopies & walkways

Dock canopies and covered truck yards for the rainy season.

Extensions & re-roofing

New bays added to an existing warehouse while it keeps running.

PEB solution with a 3D IFC model

Check racking, docks and MEP in the model before fabrication.

Fire protection up to R120

Intumescent coatings for insurer and authority requirements.

C/Z purlins

Galvanised purlins and girts for long roofs and walls.

CIF / DDP delivery

To Laem Chabang, Bangkok Port or delivered to your site.

Building types:Steel warehouses & distribution centres Cold storage & food processing Mezzanines & equipment platforms Canopies, carports & walkways

How we work with you

How a warehouse project runs with World Steel

We design, make and ship the steel; your Thai contractor builds.

1
Send the operation brief
Floor area, racking plan, docks and target opening date.
2
Concept, budget & 3D model
Column grid, tonnage and price, with a model of the warehouse.
3
Approval drawings
Calculations and drawings for your Thai engineer and the permit.
4
Fabrication you can inspect
Made in our factory. Visit, send an inspector or audit online.
5
Delivery by erection zone
CIF or DDP, packed so your crew can start on arrival.

Designed and made in our own factory

Every piece passes through World Steel hands

We are not a broker or a steel trader. Our engineers design it, and our factory in Tay Ninh makes, inspects and ships every piece.

World Steel factory · Tay Ninh, Vietnam20,000 m² · 2,500 T/month · 100 T in 3–4 weeksISO 9001 · ISO 3834-2 · EN 1090 EXC3 · AS/NZS 5131 CC3 · IAS AC472

01

Designed by our own engineers
World Steel structural engineers calculate to Thai and international codes and produce the Tekla 3D model, approval drawings and every shop drawing. Nothing is outsourced.
02

CNC cutting and drilling
Plates and sections cut by plasma, laser and CNC drilling lines straight from the model, with first-piece inspection before the batch runs.
03

Built-up members welded in-house
Submerged-arc welding lines and qualified welders make columns and rafters to ISO 3834-2 and EN 1090 EXC3.
04

Inspected before it leaves
Dimensional checks, UT and MT weld testing and paint thickness readings, recorded piece by piece in the QC dossier you receive.
05

Blasted and painted in the factory
Shot blasting and an ISO 12944 paint system chosen for inland, coastal or port sites, or intumescent fire protection up to R120.
06

Packed by erection zone, shipped CIF
Every piece marked, bundled by erection zone and loaded so the first members your erector needs reach site first.